Panasonic TOUGHBOOK CF-37 Series Reference Manual page 50

Setup Utility
Advanced Menu
Plug & Play:
Serial Port A:*
Serial Port B:*
Device:
Parallel Port:*
Mode:
Internal Modem:
Parameters
(
Plug & Play
Serial Port A
1
Base I/O*
Serial Port B
Device* 2
Base I/O* 3
Parallel Port
Mode* 4
Base I/O* 5
Internal Modem
* If [Enable] is set, sub items will be displayed.
: Default)
Disable
Enable
Disable
Enable
Auto
3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3
Disable
Enable
Auto
Touchscreen
IrDA
3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3
Disable
Enable
Auto
Uni-directional
Bi-directional
ECP
EPP
378/IRQ7 278/IRQ5 3BC/IRQ7*
Disable
Enable
1
*
This item is displayed only when [Serial Port A] is set to [Enable].
2
*
If [Device] is not set to [Touchscreen], the touchscreen function can not be used. If [Device] is
not set to [IrDA], the infrared data communications function can not be used.
3
*
This item is displayed only when [Serial Port B] is set to [Enable].
* 4
Setting impossible when [Parallel Port] is set to [Disable].
5
*
This item is displayed only when [Parallel Port] is set to [Enable].
* 6
Setting impossible when [Mode] is set to [EPP].
[Disable]
[Auto]
[Auto]
[Touchscreen]
[Auto]
[Bi-directional]
[Enable]
6
50