Panasonic TOUGHBOOK CF-37 Series Reference Manual page 27

Battery Power
Panasonic Battery Monitor
It is possible to display the current battery status and the remaining battery power by running
the Panasonic Battery Monitor.
1
2
Select from the taskbar or select [Panasonic Battery Monitor]
from [Start]-[Program]-[Panasonic].
Click [Detail]
NOTE
The deviations for the estimated time can occur depending on the condition of the
battery.
There are cases [0] (indicating a full charge) may be shown for the [Estimated Time
until fully charged] even if the remaining battery power is about 97% (e.g., when un-
plugging then plugging the AC adapter above 95%).
Battery Status
AC: AC adapter connected
Battery: No AC adapter connected
Remaining total battery power
Estimated total time until fully charged during Power
ON (Unit 15minutes)
Estimated total time until fully charged during Power
OFF (Unit 15minutes)
Battery voltage
Battery current*
Average battery current* measured over 1 minute
Battery capacity in the fully charged state
Battery temperature(Unit Fahrenheit and Celsius)
Battery type
Battery capacity (specified)
Battery voltage (specified)
* The charging current or the discharging
current is displayed.
27