Electrolux EFLW417SIW Installation Instructions Manual page 13

Reversing Door Assembly, continued
2. Lift door glass slightly and rotate 180
degrees, setting it back onto outer door.
Make sure the alignment tabs reengage.
180 180
3. Reinstall inner door onto outer door with
nine screws removed earlier.
E) Reinstalling Door Assembly
1. Insert the wiring harness terminal into the
terminal cap and wrap the harness into
the harness retainer.
2. Slide terminal cap onto back of hinge
plate until tabs snap into place.
3. Insert hinge locating pins into the hole
that were previously covered by the
plastic hole cover. Press on the face of
the hinge to snap the other locating pins
into place.
x 9
4. Reinstall all four screws removed earlier.
E) Verify Reversed Door Operation
1. Test door for free, smooth swinging
operation and secure latching when
closed.
2. Plug in washer and close the door. Test
correct door lock operation by starting a
test cycle: lock should engage, and door
should not be able to be opened until
cycle is paused or canceled.
Reversing Door
x 4
13