Making Measurements; Measuring Voltages - UNI-T ut71c Operating Manual

Model UT71C/D/E: OPERATING MANUAL
Chapt er 3
Making Measure m e n t
Intro du c t i o n
Chapter 3 explains how to make measurements. Most
measurement functions can be selected by using the
rotary switch.
While letters or symbols identify primary functions; blue
letters or symbols identify alternative functions. Press
the BLUE button to access these alternate functions.
A. Measuri n g Volta g e s
Warning
To avoid harms to you or damag es to the Mete r
from elec t r i c shoc k, please do not atte m p t to
measu re volta g e s higher than 1000V, altho ug h
readin gs may be obtain e d.
Figure 3-1. Voltages Measurement
To measure voltages, set up the Meter as Figure 3-1
and do the following:
30