Table of Contents
Advertisement
Failed to connect the camera to the remote control.
The camera is not recognized. You need to do some operation on the camera you want to
connect.
Signal traffic may be heavy or the remote control may be too far from the access point.
03-05
Cannot connect to the camera.
The remote control has already connected to the maximum number of connectable cameras.
Check the number of cameras you are connecting.
04-03
Request to the camera failed.
Check the camera.
04-04
No response from the camera.
Check the camera.
Signal traffic may be heavy or the remote control may be too far from the access point.
05-01
Failed to shoot still images.
Check the camera.
05-02
Recording with the memory card inserted in the incorrect direction.
No memory card is inserted into the camera.
The memory card has no free memory space.
Check the orientation of the memory card.
Make sure that a memory card is inserted into the camera.
Use a memory card that has free memory space.
05-03
Cannot stop recording.
Check the camera.
05-04
Failed to start loop recording.
Check the remaining memory card level.
Advertisement
Table of Contents
