Table of Contents
Advertisement
[89] Warning indicators and error messages
Error display on the Live-View Remote
If the following messages appear, follow the instructions.
01-01/02-02
Failed to connect the camera to the remote control.
Signal traffic may be heavy or the remote control may be too far from the access point.
01-02
Failed to connect the camera to the remote control.
Follow the steps in "Connecting the remote control to a single camera via Wi-Fi" or "Connecting
the remote control to multiple cameras via Wi-Fi."
01-03/01-04
Failed to connect the camera to the remote control.
The camera is not compatible.
02-01
No memory card is inserted into the camera.
The memory card is inserted in the incorrect direction.
Insert the memory card in the correct direction, then turn on the camera.
02-03
Camera error
Confirm the accessing camera or memory card.
03-01
Signal traffic is heavy.
The camera operation for connecting to the remote control has failed.
Change the conditions and try the connecting procedure again.
Check the connecting procedure.
03-02
Failed to connect the camera to the remote control.
The camera is not recognized. Follow the steps in "Connecting the remote control to a single camera
via Wi-Fi" or "Connecting the remote control to multiple cameras via Wi-Fi."
Signal traffic may be heavy or the remote control may be too far from the access point.
03-03/03-04
Advertisement
Table of Contents
