Table of Contents
Advertisement
HDR-AZ1/Lens-style Camera (QX series)
Check that a Wi-Fi mark is displayed on the display panel of the camera.
For DSC-QX100/QX10, the Wi-Fi mark is not displayed on the camera display.
If the connection mode of the camera is set to multi connection, switch to single connection.
For HDR-AS15/AS30V, insert a memory card to the camera.
Select the camera you want to connect to the remote control.
4
Press the UP button or DOWN button to select the model name of the camera which you
1.
want to connect to the remote control.
2.
Press the REC/ENTER button.
3.
When the remote control is in the standby status, proceed to step
If you press the REC/ENTER button in the standby status, the remote control will be released
from the standby status. In this case, select the model name of the camera again.
.
Advertisement
Table of Contents
