Panel Lock; Settings; Settings Menu Options - Bosch HBL84 Use And Care Manual

The oven will adjust its set temperature after a randomized
delay.

Panel Lock

Allows the user to disable all buttons on the control panel.
Panel Lock can only be enabled in stand by mode
1. To enable Panel Lock, press and hold the Panel Lock
touchpad for 3 seconds (in stand by mode).
2. To disable Panel Lock, press and hold the Panel Lock
touchpad for 3 seconds. The display returns to stand
by mode.

Settings

The oven setup menu is used to customize certain oven
settings.
The oven must be in Stand by mode (no cooking mode or
timer running) in order to access the setup menu.
To make changes to Settings Menu Items:
1. Press the Settings touchpad.
2. The first setup item is displayed.
3. To display a different setup item, press the number
corresponding to that setting (see table following or
press the Settings touchpad to cycle through available
options).
4. To change the value for the displayed setting press the
Enter touchpad to enter the edit mode. Use the
numeric keypad to change the setting value. The
corresponding setting value is shown in the table
following.
For the temperature offset, with the item in edit mode,
press "-" or "+" first, then the numeric offset value.
The new value is automatically accepted as the display
reverts from edit mode back to display mode.
To exit the Settings menu:
Press the Clear On/Off touchpad (Upper Clear/Off or
Lower Clear/Off for double ovens).

Settings Menu Options

Menu Item
1 Temperature Fahrenheit (° F) or
Mode Celsius (° C)
2 Brightness High, Medium, Low
3 Volume High, Medium, Low
4 Clock mode 12-hour or 24-hour display
mode. 12HR, 24HR.
5 Auto Decreases oven temperature
Convection by degrees set for convection
Conversion cooking modes. On, Off.
6 Button Beep Tone when touchpad is
pressed. On, Off.
7 Stand by Clock displays when no
Clock cooking mode or timer is in
Display use. ON, OFF.
8 Language Language setting: English,
(EN), French, (FR)
9 Temperature Sets the temperature offset
Offset value for Bake, Convection
Bake, Roast, Convection
Note:
Roast and Convection Multi-
Temperature
Rack. When an offset value is
offsets must
entered, the actual oven
always be
temperature is increased or
entered as 2
decreased by this value. This
digits.
feature is useful if food is
Example:
consistently either too brown
5° F is or too light.
entered as
The range for changing the
05.
offset is between +/- 35° F (+/
- 19° C) in 1° increments.
For double ovens: You can
set the Oven Temperature
Offset for each oven
separately.
The default value is 0.
Description Default
°F
High
MED
12HR
OFF
OFF
ON
EN
0
English 17