Table of Contents
Advertisement
Troubleshooting (continued)
Others (continued)
Problem
Images are not 3D.
*
The 3D Emitter and 3D
Glasses are sold separately.
They are not supplied with
this product.
The power of the 3D Glasses
turns off automatically.
*
The 3D Glasses are sold
separately. They are not
supplied with this product.
There is something wrong
with the 3D images.
*
The 3D Emitter and 3D
Glasses are sold separately.
They are not supplied with
this product.
The indicator blinks five
times when the power of the
3D Glasses is turned on.
*
The 3D Glasses are sold
separately. They are not
supplied with this product.
The indicator does not light
up even if the power button
is pressed.
*
The 3D Glasses are sold
separately. They are not
supplied with this product.
If the following problem occurs after the lamp is replaced, check the following first
Problem
The projector does not
turn on.
The STATUS indicator
blinks.
Solution
•
Are the image settings switched to 3D mode?
→ Switch the mode to 3D mode.
•
Is there any block in the communication area between the 3D Emitter and the 3D Glasses? Or, is there a
sticker or other such item on the infra-red reception section on the 3D Glasses?
→ The 3D Glasses operate by receiving signals from the 3D Emitter. Check that there is not any block in
the communication area between the 3D Emitter and the 3D Glasses.
•
Is the distance between the 3D Emitter and 3D Glasses too far, or too close?
→ Adjust the location of the 3D Emitter.
•
Are the direction of the 3D Emitter and that of the infra-red reception section on the 3D Glasses misaligned?
→ Adjust the direction and location of the 3D Emitter.
•
Is the 3D Glasses turned off?
→ Press the power button of the 3D Glasses to turn it on.
•
It may need to switch the 3D mode (such as 3D setting system) of the recorder/player when projecting 3D
images with the 3D image supporting recorder/player. (For detail, see the User Manual of the recorder/
player.)
•
Is the 3D mode of the projector set properly for the image?
→ Set the 3D mode of the projector (frame packing, side-by-side, top and bottom) properly for the image.
•
Is the 3D Emitter connected to the projector?
•
The 3D Glasses may become out of sync due to fluorescent light. Turn off the fluorescent light.
•
Is there any other 3D Emitter or 3D image supporting television close to the 3D Glasses?
→ The 3D Glasses work by receiving signals from the 3D Emitter. Check that there is no interference of
the signals from other infra-red emission section.
•
Is there any block in the communication area between the 3D Emitter and the 3D Glasses? Or, is there a
sticker or other such item on the infra-red reception section on the 3D Glasses?
→ When the signal from the 3D Emitter is interrupted, the power of the 3D Glasses automatically turns off
5 minutes after the interruption. Check that there is not any block in the communication area between
the 3D Emitter and the 3D Glasses.
•
Depending on the 3D image status, you may feel something wrong with the 3D images.
→ Switch the "3D Sync" setting of the projector to check whether or not the uncomfortable feeling is
disappeared.
→ When the signal from the 3D Emitter is interrupted, the power of the 3D Glasses automatically turns off
5 minutes after the interruption. Check that there is not any block in the communication area between
the 3D Emitter and the 3D Glasses.
•
The 3D Glasses may become out of sync due to fluorescent light. Turn off the fluorescent light.
•
Is there any other 3D Emitter or 3D image supporting television close to the 3D Glasses?
→ The 3D Glasses work by receiving signals from the 3D Emitter. Check that there is no interference of
the signals from other infra-red emission section.
•
The battery of the 3D Glasses dies.
→ Replace the battery with a new one.
•
Does the battery of the 3D Glasses die?
→ Replace the battery with a new one if the indicator does not light up even when you press the power
button.
Solution
• Attach the lamp cover securely. (See pages 44 and 45.)
• Reset the lamp operating time. (See page 45.)
• Reset the lamp operating time. (See page 45.)
EN-51
Advertisement
Table of Contents
