Mitsubishi Electric HC9000D User Manual page 34

Menu operation (continued)
How to set the menus:
The following describes how to set Off Timer time as
an example.
1. Press the MENU button.
• The menu selection bar is displayed.
2. Press the t or u button to select Setup menu.
• Every time the t or u button is pressed, the menu
switches among Picture 1, Picture 2, Projection,
Screen, Input, Setup and Info.
3. Press the ENTER button (or q button).
• The item to set can be selected.
4. Press the p or q button to select Off Timer to adjust.
Available settings in the menus
Set the following items on their relevant menus.
1.Picture 1 menu
1. Picture 1 menu
ITEM SETTING
Picture Mode Cinema
VIDEO
3D
Dynamic
User1/ User2/ User3
Contrast ±50
Brightness ±50
Color ±50
Tint ±50
Sharpness ±50
Gamma Cinema
Correction
2.0
2.1(Video)
2.2
3D
User
5. Press the t or u button to set the desired
Off timer setting.
To cancel the menu:
6. Press the MENU button
Important
• When the buttons don't function, unplug the power
cord from the wall outlet. Wait about 10 minutes,
plug the power cord in, and try again.
• After selecting the items marked with
ENTER button.
• The menus and screens shown in this manual may
be different from those of the actual projector.
• When you change the menu to set, press the p
button several times to select the menu selection bar
and then start operation from step 2.
2. Picture 2 menu
FUNCTION
This is a mode for watching movies in dim lighting as in a theater.
This is a standard mode suitable for watching video images, etc.
This is a mode for watching 3D Film.
This is a bright mode suitable for watching sports images.
Use to adjust and save the Picture Mode settings voluntarily.
Use to adjust the contrast of the projected image. (See page 39.)
Use to adjust the brightness of the projected image. (See page 39.)
Use to adjust the color thickness of the projected image. (See page 39.)
Use to adjust the color tint of the projected image. (See page 39.)
Use to adjust the sharpness of the projected image. (See page 39.)
Use to attach greater importance to dark image quality.
This is a mode for watching movies in dim lighting as in a theater.
This is a bright mode suitable for watching sports images, etc.
This is a standard mode suitable for watching video images, etc.
This is a standard mode suitable for film material.
This is a brightest mode suitable for watching 3D movies.
This is a mode to customize the gamma curve.
EN-34
, press the