Table of Contents
Advertisement
Menu operation (continued)
6. Setup menu
ITEM
SETTING
Menu Position
Center/Top Left/Top
Right/Bottom Left/
Bottom Right
Language
12 languages
Background
Blue
Color
Black
Lamp Mode
Normal
High
Off Timer
Off
1 Hour
2 Hours
3 Hours
4 Hours
Trigger1 (Power)
Off / On
Trigger2 (Anamo)
Off / On
Remote Position
3 Options
Lens Lock
Lens Focus Lock
Lens Focus
Lens Zoom Lock
Lens Zoom
Lens Shift Lock
Lens Shift
Lamp Time Reset Yes / No
Test Pattern
9 options
Reset All
Yes/No
When the lamp mode is switched, the projected image may flicker. This is not a product malfunction.
•
Do not change the setting of Lamp Mode frequently.
•
It may take a little while to carry out Reset All in the Setup menu.
•
7. Info menu
7. Info menu
ITEM
Input Resolution
Lamp Hours(Normal)
•
The Lame Hours is calculated based on that Lamp Mode is Normal.
FUNCTION
Use to change the position of the menu.
Use to select the language used in the menus:
Italiano, 中文, 한국어, Русский, Português, Svenska, Nederlands.
Use to select blue as the background color when there is no signal input from the source.
Use to select black as the background color when there is no signal input from the source.
Select to moderate the intensity of the lamp. The operating sound is reduced.
Select this option when you want to view images in a well-lit room.
Does not use the Off Timer function.
When no video signal is input and no operation is made for 1 hour, the projector
automatically turns off.
When no video signal is input and no operation is made for 2 hours, the projector
automatically turns off.
When no video signal is input and no operation is made for 3 hours, the projector
automatically turns off.
When no video signal is input and no operation is made for 4 hours, the projector
automatically turns off.
When this option is set to On, the trigger output signal (12 V) is output from the TRIGGER
terminal when the lamp lights up.
When this option is set to On, the trigger output signal (12 V) is output from the TRIGGER
terminal when the aspect ratio is set to ANAMORPHIC 1 or ANAMORPHIC 2.
Set the position of remote infrared receiver to front or rear.
Use to enable or cancel the Focus Lock.
Adjust the focus of the screen. Press ENTER to display the focus adjustment dialog and
adjust the focus by pressing the
Use to enable or cancel the Lens Zoom Lock.
Adjust the size of the screen. Press ENTER to display the zoom adjustment dialog and
adjust the zoom by pressing the
Use to enable or cancel the Lens Shift Lock.
Adjust the position of the screen. Press ENTER to display the lens shift adjustment dialog
and adjust the position by pressing the
The lamp operation time is reset to 0.
Display the selected test pattern on the projected screen.
The menu settings are reset to the factory defaults (except the Language and Lamp Time
Reset settings).
DESCRIPTION
Display the resolution of the image signal being projected.
Display the lamp operating time. (unit: hours)
EN-38
日本語,English, Español, Deutsch, Français,
p
q
or
button. (See page 18.)
p or q
button. (See page 18.)
p
q
t
u
,
,
or
button. (See page 12.)
Advertisement
Table of Contents
