Table of Contents
Advertisement
Viewing video images (continued)
Setting the aspect ratio
You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the
setting according to the type of the input video signal.
Setting
Original image size
4:3 image
(SD signal)
16:9 image
(HD signal)
PC signal
(4:3)
2.35:1 image
• Bold frames are recommended modes.
• When Aspect Ratio is set to Anamorphic1, display position can be changed with p or q button on the remote
control.
• This projector is equipped with a function to change the aspect ratio. If you select an aspect ratio that is
inconsistent with that of the input signal, images around the screen edges may be hidden or deformed. When
viewing original video works reflecting the authors' intentions, you are recommended to keep their aspect ratios
unchanged.
• It may be an infringement of the rights protected by the copyright law to project images compressed or enlarged
by changing the aspect ratio in public areas, such as inside and outside shops and hotels, for commercial or public
viewing purposes.
Standard
Aspect ratio changes
Squeezed image is
depending on the input signal.
expanded to 16:9.
Full Screen
Anamorphic1
This mode is suitable for
viewing 2.35：1-size
images using the
anamorphic lens.
EN-20
: Signal size
Anamorphic2
This mode is suitable for
viewing 16：9 or 4：3-size
images or images input from
personal computers using the
anamorphic lens.
Advertisement
Table of Contents
