English - Master BMH 32-XE Operating Instructions Manual

OBJ_BUCH-820-001.book Page 12 Monday, August 18, 2008 10:25 AM
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious
injury.
❏ See data sheet for further safety warnings
and instructions.
❏ Wear hearing protection. Exposure to noise
can cause hearing loss.
❏ Use auxiliary handle(s), if supplied with
the tool. Loss of control can cause personal
injury.
❏ Use suitable detectors to determine if util-
ity lines are hidden in the work area or
call the local utility company for assist-
ance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead
to explosion. Penetrating a water line causes
property damage or may cause an electric shock.
❏ Hold the power tool only by the insulated
gripping surfaces when performing an
operation where the cutting tool may con-
tact hidden wiring or its own cord. Contact
with a "live" wire will also make exposed metal
parts of the power tool "live" and shock the oper-
ator.
Intended Use
The machine is intended for hammer drilling in con-
crete, brick and stone, as well as for light chiselling
work. It is also suitable for drilling without impact in
wood, metal, ceramic and plastic.
For damage caused by usage other than intended,
the user is responsible.
12–English
For Your Safety
❏ When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
❏ Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
❏ Do not work materials containing asbes-
tos. Asbestos is considered carcinogenic.
❏ Take protective measures when dust can
develop during working that is harmful to
one's health, combustible or explosive.
Example: Some dusts are regarded as carcino-
genic. Wear a dust mask and work with dust/chip
extraction when connectable.
❏ Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from light
alloys can burn or explode.
❏ Always wait until the machine has come to
a complete stop before placing it down.
The tool insert can jam and lead to loss of control
over the power tool.
❏ Never use the machine with a damaged
cable. Do not touch the damaged cable
and pull the mains plug when the cable is
damaged while working. Damaged cables
increase the risk of an electric shock.
❏ Use only original Würth accessories.
Product Features
While reading the operating instructions, unfold the
graphics page for the machine and leave it open.
The numbering of the product features refers to the
illustration of the power tool on the graphics page.
1 SDS-plus tool holder
2 Dust protection cap
3 Locking sleeve
4 Lock ring of the tool holder
5 Mode selector switch
6 Vibration damper
7 On/Off switch
8 Rotational direction switch
9 Button for depth stop adjustment
10 Auxiliary handle
11 Depth stop
12 Quick change keyless chuck*
13 Front sleeve of the quick change keyless chuck*
14 Retaining ring of the quick change keyless chuck*
15 Extraction sleeve of the extraction device*
18.8.08