Mitsubishi Electric F700 Instruction Manual page 73

Parameter list
Parameter
Up-to-frequency
41
sensitivity
Output frequency
42
detection
Output frequency
43
detection for
reverse rotation
Second output
50
frequency detection
44, 45
Refer to Pr. 7 and Pr. 8.
46
Refer to Pr. 0.
—
47
Refer to Pr. 3.
48, 49
Refer to Pr. 22 and Pr. 23.
50
Refer to Pr. 41 to Pr. 43.
—
51
Refer to Pr. 9.
DU/PU main display
52
data selection
Watt-hour meter
170
clear
Operation hour
171
meter clear
Monitor decimal
268
digits selection
Energization time
563
carrying-over times
Operating time
564
carrying-over times
Cumulative power
monitor digit shifted
891
times
CA terminal
54
function selection
Frequency
55
monitoring
reference
Current monitoring
56
reference
AM terminal
158
function selection
AM output filter
867
Current output filter
869
68
Incre Initial
Name
ments Value
0.1% 10%
0.01Hz 6Hz
0.01Hz 9999
0.01Hz 30Hz
1 0
1 9999
1 9999
1 9999
1 0
1 0
1 9999
1 1
0.01Hz 50Hz
Inverter
0.01/
rated
0.1A
*9
current
1 1
0.01s 0.01s
0.01s 0.02s
Range Description
0 to 100% Set the level where the SU signal turns on.
Set the frequency where the FU signal
0 to 400Hz
turns on.
Set the frequency where the FU signal
0 to 400Hz
turns on in reverse rotation.
9999 Same as Pr.42 setting
Set the frequency where the FU2 signal turns
0 to 400Hz
on.
0, 5, 6, 8 to
Select the monitor to be displayed on the
14, 17, 20, 23
operation panel and parameter unit.
The setting value of "9" is available only
to 25, 50 to
for the 01800 or more.
57, 100
0 Set "0" to clear the watt-hour meter monitor.
Set the maximum value when monitoring
10
from communication to 0 to 9999kWh.
Set the maximum value when monitoring
9999
from communication to 0 to 65535kWh.
Set "0" in the parameter to clear the watt-
0, 9999 hour monitor.
Setting "9999" has no effect.
0 Displays the monitor as integral value.
1 Displays the monitor in increments of 0.1.
9999 No fixed decimal position
The numbers of cumulative energization
0 to 65535 time monitor exceeded 65535h is displayed.
Reading only
The numbers of operation time monitor
0 to 65535 exceeded 65535h is displayed.
Reading only
Set the number of times to shift the
0 to 4 cumulative power monitor digit.
Clamp the monitor value at maximum.
No shift
9999 Clear the monitor value when it exceeds
the maximum value.
1 to 3, 5, 6, 8 Select the monitor output to terminal CA.
to 14, 17, 21, The setting value of "9" is available only
24, 50, 52, 53 for the 01800 or more.
Set the full-scale value to output the
0 to 400Hz output frequency monitor value to terminal
CA and AM.
Set the full-scale value to output the output
0 to 500/
current monitor value to terminal CA and AM.
0 to 3600A
*9 The setting depends on the inverter
*9
capacity (01160 or less/01800 or more)
1 to 3, 5, 6,
Select the monitor output to terminal AM.
8 to 14,
The setting value of "9" is available only
17, 21, 24,
for the 01800 or more.
50, 52, 53
0 to 5s Set the output filter of terminal AM.
0 to 5s Adjust response level of current output.
All
Param Param
param
eter eter
eter
copy clear
clear
: enabled
× : disabled
× ×
× × ×
× × ×
× × ×