Mitsubishi Electric F700 Instruction Manual page 109

Check and clear of the alarm history
(2) Clearing procedure
POINT
· The alarm history can be cleared by setting "1" in Er.CL Alarm history clear. (The alarm history is not cleared when
"1" is set in Pr. 77 Parameter write selection)
1.
Screen at powering on
The monitor display appears.
2.
Press
setting mode.
3.
appears.
4.
Press
" "(initial value) appears.
5.
Turn
it to the setting value " ".
6.
Press
104
Operation
to choose the parameter
to read the currently set value.
to change
to set.
· Press to read another parameter.
· Press to show the setting again.
· Press twice to show the next parameter.
Display
Flicker ··· Alarm history clear complete!!
The parameter
number previously
read appears.