GE GCW200YAWC Series Service Manual page 31

4. Dispenser Solenoid Valve (Dispenser Models Only)
1) Disassembling Procedure (Features are model dependent)
No
1
Disassemble the Cover dispenser Box As
2
Separate Front PCB connector.
(Features are model dependent.)
3
Unscrew to remove Box Dispenser Ice Shut.
2) How to check Dispenser Solenoid Valve
Parts
Dispenser Solenoid Valve
Flap Heater Assembly
Procedure
How to Check
HOW TO CHECK EACH PART
No
4
Disconnect 2 terminals and 2P Wire.
5
Unscrew and remove Solenoid Valve.
6
Unscrew and remove Cover Ice Flap.
Check the resistance of
both terminals.
Check the resistance of
2 terminals with a Tester.
30
Procedure
Remark
( Good ): 215 Ohm (+-10%)
(193 ~ 236 Ohm)
(Defective): Change the part.
( Good ): 96 Ohm (+-8%)
(88 ~ 104 Ohm)
(Defective): Change the part.