GE GCW200YAWC Series Service Manual page 25

6. Pull Down Mode
1) How to start
( Basic Model )
; Push the Freezer door switch 5 times while pushing the FRZ. SET button.
( Dispenser Model )
; Push the Lock button. Then Refrigerator Set + Freezer Set + Water/Ice 5 times at the same time.
2) How to control : Compressor, Freezer Fan, Refrigerator Fan and Compressor Cooling Fan is ON for 30 hours.
3) Display : Co display in Error Mode
4) Termination : After 30 hours or power reset.
7. How to check the filter running time. ( Disepnser models only )
1) Press the LOCK button.
2) Press the Super Freezer Button 5 times while pushing the Freezer SET button.
3) Push the Freezer SET button until display Fi-Lt.
4) Remaining time display when push the Dispenser button.
( ex. 40 : 12 means that 4012 minutes remains until exchange. )
8. Adjust the amount of water ( Default setting is P100, 86cc water supply ) - Dispenser Models only
; Function to adjust the amount of water supply.
1) Press the LOCK button.
2) Press the SUPER FRZ. 5 times while pressing the FRZ. SET button.
3) Press the FRZ. SET button until display P100 on LCD.
When need more water supply : Press the SUPER REF button.
- P101 ( 87cc ), P102 ( 88cc ), P103 ( 89cc )......
When need less water supply : Press the REF. SET button.
- P99 ( 85cc ), P98 ( 84cc ), P97 ( 83cc )......
24
FUNCTIONS