Jenn-Air W30100 Use And Care Manual page 8

To set oven on Bake
1. Place oven racks on proper rack positions. (See p. 9.)
2. Touch Bake Pad.
Indicator Word BAKE will flash and three dashes will be shown in the Display.
Note: If more than fifteen seconds elapse between touching the Bake Pad and
touching an Arrow Pad, the Display will return to previous Display.
3. Touch Up or Down Arrow Pad(s) until desired oven temperature appears in the
Display.
(Allowablerange is 100° to 550°.)Note: The first tap of an Arrow Pad will give you
350 °.
After four seconds, the oven wiIJbegin to preheat. The indicator Words ON and
BAKEwill appear in the Display. The temperature shown will be f 00° or the actual
oven temperature whichever is higher.
Example: If at 10 o'clock you set the oven for 3500for baking, after four seconds
the Display will show:
I0:00 oo"
Duringthe preheat, the Display will show a nse in 5° increments until programmed
temperature is reached. When the oven is preheated, the oven wi[I beep once, the
ON fndicator Word will go off and the BAKE Indicator Word and programmed oven
temperature will remain in the DispJay.
Note: Oven will preheat for approximately 7 to 11 minutes.
Important: Whenever ON appears in the Display, the oven is heating.
To recall temperature set during preheat: Touch the Bake Pad. Temperature
will be briefly displayed, then will automaticafly return to on-going program.
To change temperature set: Touch the Bake Pad and Up or Down Arrow Pad(s)
for the new desired temperature. Note: if you are lowering the temperature beJow
the current oven temperature, the Indicator Word ON will appear briefly in the
Display and the preheat beep will sound. Then, the Display will show programmed
temperature and indicator Word BAKE only.
4. Touch Cancel Off Pad to turn oven off at end of baking.