Figure 52: Mac/Ip/Port Filtering - Alfa Network AIP-W502 User Manual

Figure 52: MAC/IP/Port Filtering

The following items are displayed on this page:
◆ MAC/IP/Port Filtering — Enables or disables MAC/IP/Port Filtering.
(Default: Disable)
Default Policy — When MAC/IP/Port Filtering is enabled, the default
◆
policy will be enabled. If you set the default policy to "Dropped", all
incoming packets that don't match the rules will be dropped. If the
policy is set to "Accepted," all incoming packets that don't match the
rules are accepted. (Default: Dropped)
MAC Address — Specifies the MAC address to block or allow traffic
◆
from.
– 89 –
| Firewall Configuration
C 8
HAPTER
MAC/IP/Port Filtering