L2Tp; Figure 30: L2Tp Configuration - Alfa Network AIP-W502 User Manual

Enables the Layer 2 Tunneling Protocol (L2TP) for implementing virtual

L2TP

private networks. The service is provided in many European countries.

Figure 30: L2TP Configuration

The following items are displayed on this page:
Server IP — Sets the L2TP server IP Address. (Default: l2tp_server)
◆
User Name — Sets the L2TP user name for the WAN port.
◆
(Default: l2tp_user; Range: 1~32 characters)
Password — Sets a L2TP password for the WAN port. (Default:
◆
l2tp_password; Range: 1~32 characters)
Verify Password — Prompts you to re-enter your chosen password.
◆
Address Mode — Sets a L2TP network mode. (Default: Static)
◆
– 56 –
| Network Settings
C 6
HAPTER
WAN Setting