Table of Contents
Advertisement
6
WAN S
ETTING
N
S
ETWORK
The Network Settings pages allow you to manage basic system
configuration settings. It includes the following sections:
◆
"WAN Setting" on page 50
"DHCP" on page 51
■
"Static IP" on page 52
■
"PPPoE" on page 53
■
"PPTP" on page 54
■
"L2TP" on page 56
■
"LAN Setting" on page 58
◆
"DHCP Clients" on page 60
◆
"Advanced Routing" on page 61
◆
In Bridge mode, the Mini Broadband Router's Network Settings
N
:
OTE
options are significantly reduced, with only LAN Settings and the Client List
being available to the user.
The WAN Setting page specifies the Internet connection parameters. Click
on "Network Settings" followed by "WAN".
WAN Connection Type — By default, the access point WAN port is
◆
configured with DHCP enabled. After you have network access to the
access point, you can use the web browser interface to modify the
initial IP configuration, if needed. The options are Static IP, DHCP (cable
modem), PPPoE (DSL modem), PPTP, and L2TP. Each option changes
the parameters displayed below it. (Default: DHCP).
– 50 –
ETTINGS
Advertisement
Table of Contents
