Setting The Handset; Changing The Display Language; Setting The Display; Setting The Screen Picture - Siemens GIGASET S88H Manual

Table of Contents

Advertisement

Setting the handset

Deactivating the room monitor
remotely
Preconditions: The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤
Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings (e.g. no ringer tone) on the
handset will remain activated until you
press the display key
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with
(page 17).
§Save§
Setting the handset
Your handset is preconfigured, but you
can change the settings to suit your indi-
vidual requirements.

Changing the display language

You can view the display texts in different
languages.
¢
¢
v
Ð
Handset
The current language is indicated by
s
Select a language and press
.
§OK§
a
Press and hold (idle status).
If you accidentally choose a language you
do not understand:
v 5 4
Press keys in sequence.
s
Select the correct language
and press
18
on the handset.
§OFF§
¢
Language
.
.
§OK§

Setting the display

You have a choice of four colour schemes
and several different contrasts.
¢
¢
v
Ð
Display
Colour Scheme
Select and press
s
Select a colour scheme and
press
§OK§
our).
a
Press briefly.
Contrast
Select and press
r
Select contrast.
Press the display key.
§Save§
a
Press and hold (idle status).

Setting the screen picture

You can display a screen picture (digital
clock) when the handset is in idle status.
This will replace the idle status display. It
may conceal the date, time and name.
The screen picture is not displayed in cer-
tain situations, e.g. during a call or when
the handset has been deregistered.
If the screen picture has been activated,
the menu item
Screen Picture
with
.
¢
¢
v
Ð
Display
The current setting is displayed.
¤
Change multiple line input:
Activation:
Select
(screen picture is displayed)
On
or
(no screen picture).
Off
Selection:
Change screen picture if necessary (see
below).
¤
Save changes: (page 25).
If the screen picture conceals the display,
briefly press a to show the idle display
with time and date.
.
§OK§
(
= current col-
.
§OK§
is marked
¢
Screen Picture

Advertisement

Table of Contents
loading

Table of Contents