Charging Time - Panasonic LUMIX DMC-FX70 Basic Operating Instructions Manual

Hide thumbs Also See for LUMIX DMC-FX70:
Table of Contents

Advertisement

Connect the AC mains lead.
Disconnect the charger from the
electrical socket and detach the battery
after charging is completed.
∫ About the [CHARGE] indicator
The [CHARGE]
indicator turns on: The [CHARGE] indicator A is turned on and charging will start.
The [CHARGE]
indicator turns off: The [CHARGE] indicator A of the charger will turn off once
When the [CHARGE] indicator flashes
The battery temperature is too high or too low. It is recommended to charge
the battery again in an ambient temperature of between 10 oC to 30 oC (50 oF
to 86oF).
The terminals of the charger or the battery are dirty. In this case, wipe them
with a dry cloth.

∫ Charging time

Charging time
∫ Approximate operating time and number of recordable pictures
Number of recordable pictures
Recording time
Playback time
Recording conditions by CIPA standard
CIPA is an abbreviation of [Camera & Imaging Products Association].
Normal Picture Mode
Temperature: 23 oC (73.4
Using a Panasonic SD Memory Card (32 MB).
Using the supplied battery.
Starting recording 30 seconds after the camera is turned on. (When the Optical
Image Stabilizer function is set to [AUTO].)
Recording once every 30 seconds with full flash every second recording.
Rotating the zoom lever from Tele to Wide or vice versa in every recording.
Turning the camera off every 10 recordings and leaving it until the temperature
of the battery decreases.
the charging has completed without any problem.
o
F)/Humidity: 50%RH when LCD monitor is on.
Approx. 130 min
Approx. 360 pictures
Approx. 180 min
Approx. 350 min
(ENG) VQT2V57
15

Advertisement

Table of Contents
loading

Table of Contents