Brinkmann 3820 Owner's Manual page 33

Valve
Burner
Igniter Lead Wire
Step 16
Attach the tank brace by inserting the
pre-attached carriage bolt through the
keyhole, slide down and then use the
wing nut to secure.
Wing Nut
Carriage
Tank Bracket
Bolt
Step 17
Insert each main burner igniter lead wire
to each valve.
Step 18
Attach side burner assembly using
four M6 X 10 mm bolts, insert
M6 X 10 mm bolts halfway and then
slide side burner assembly down over
bolts and tighten securely.
32