Step 13
Attach the handle to the charcoal body
using two pre-attached M6 X 10 mm
bolts, heat shields as shown.
Step 14
Attach main control panel to gas grill
using four M6 X 10 mm bolts from
inside gas grill body.
Step 15
Insert electrode wire and burner
openings through burner holes in
gas grill bottom. Orient burners
CORRECTLY by aligning screw holes
in burner to left as shown. Secure
burner tubes using three
M6 X 10 mm bolts.
Note: Make sure burner opening slides
over valve nozzle.
31
Bolts
Heat Shields
Grill Handle