Service Position; Checking & Repairing Main P.c.b - Panasonic SA-PT480PH Service Manual

10 Service Position

Note: For description of the disassembly procedures, see
the Section 8.
10.1. Checking & Repairing Main
P.C.B.
10.1.1. Checking & Repairing of Side B of
Main P.C.B.
Step 1 Remove Top Cabinet.
Step 2 Lift up Voltage Selector P.C.B..
Step 3 Detach 18P FFC at the connector (CN2006) on Main
P.C.B..
Step 4 Remove 2 rivets.
Cauntion: Keep the rivets in safe place, place it back dur-
ing assembling.
Step 5 Detach 22P FFC at the connector (CN2002) on Main
P.C.B..
Step 6 Detach 15P FFC at the connector (CN2007) on Main
P.C.B..
Step 7 Detach 8P FFC at the connector (CN2000) on Main
P.C.B..
Step 8 Detach 7P FFC at the connector (FP8251) on Main
P.C.B..
Step 9 Detach 24P FPC at the connector (FP8531) on Main
P.C.B..
Step 10 Lift up the wire clamper.
Step 11 Detach 10P Cable at the connector (CN2004) on Main
P.C.B..
Step 12 Detach 10P wire at the connector (FP9001) on Main
P.C.B..
Step 13 Remove 4 screws on Main P.C.B..
76