Panasonic SA-PT480PH Service Manual page 50

Step 2 Lift up Power Button P.C.B..
Step 3 Desolder 4P Cable (H6803) on Power Button P.C.B..
Step 4 Remove Power Button P.C.B..
• Assembly of Power Button P.C.B.
Step 1 Solder 4P cable at (H6803) onto Power Button P.C.B..
Step 2 Fix the Power Button P.C.B. onto the Front Panel.
Caution: Ensure that it is properly located & fully catched.
Step 3 Fix 1 screw onto Power Button P.C.B..
Step 4 Dress 4P cable flatly against the Top Wall of Front
Panel.
50