Brother PJ-722 Online User's Manual page 85

Changing the Printer Settings
6 International Character Set
Lists countries for the character set.
Available settings: [United States], [France], [Germany], [Britain], [Denmark], [Sweden], [Italy],
[Spain], [Japan], [Norway], [Denmark II], [Spain II], [Latin America], [Korea], [Legal]
The following 12 codes are switched depending on the country selected from the list above:
23h 24h 40h 5Bh 5Ch 5Dh 5Eh 60h 7Bh 7Ch 7Dh 7Eh
For switched characters, see the P-touch Template Manual/Command Reference (which can be
downloaded from the Brother Solutions Center website).
7 Command Prefix Character
Specifies the prefix character code, which identifies commands used in P-touch Template mode.
8 Non-Printed Character
Characters specified here are not printed when data is received. Specify 1 to 20 characters.
9 Available Return Code
The line feed code is used when feeding data to indicate that the following data should be moved to the
next line in a text object. One of the following four line feed codes can be selected, or 1 to 20 characters
can be specified as the line feed code.
Available settings: [^CR], [\0D\0A], [\0A], [\0D]
10 Number of Copies
Sets the number of copies. A number between 1 and 99 can be specified.
11 Set
Saves the settings as an .ini file when the dialog box is closed.
To save the specified settings in a command file, select [Save in Command File] from the drop-down
menu. The saved command file can be used with the mass storage mode to apply the settings to a printer.
(See Mass Storage Mode on page 91.)
12 Cancel
Cancels the settings and closes the dialog box. The settings will remain unchanged.
13 Default
Returns to the factory settings.
3
77