Brother PJ-722 Online User's Manual page 37

Setting Up the Printer
c
Press and hold the
The (Wi-Fi) indicator starts flashing in blue once every three seconds.
d
Configure the Infrastructure Mode settings of the printer.
®
 For Windows
Start the Printer Setting Tool on your computer, and click the [Communication Settings] button.
Select [Wireless LAN] for [Selected Interface] in the [General] tab, and select [Infrastructure]
for [Communication Mode] in [Wireless Settings] in the [Wireless LAN] tab.
See Communication Settings (PJ-762/PJ-763/PJ-763MFi/PJ-773 Only) on page 48 for more
information on the Communication Settings.
 For Mac computers
Start the Wireless Device Setup Wizard included in the Printer Driver Package, and then follow the
on-screen instructions.
If you have not downloaded the Printer Driver Package, visit your model's Downloads page on the
Brother Solutions Center at support.brother.com to download the package. Double-click the
downloaded file. The Wireless Device Setup Wizard can be found in the [Utilities] folder.
e
Enter the SSID that you wrote down, or click [Search] and select the SSID from the displayed list.
f
Enter the password as [Passphrase].
Note
The required information depends on the authentication method and encryption mode; enter only the
information relevant to your network environment.
g
Click [Apply].
When the connection between the printer and your Wi-Fi access point/router is established, the
(Wi-Fi) indicator lights in blue. Computers and mobile devices that are on the same network as the
printer will have access to the printer.
Note
• To change any other network settings, use the Printer Setting Tool (see Changing the Printer Settings
on page 45).
• To connect your mobile device to the Wi-Fi access point/router, select the SSID and enter the password
of the Wi-Fi access point/router to establish the connection between the mobile device and Wi-Fi access
point/router.
(Wi-Fi) button on your printer for one second to turn the Wi-Fi function on.
PCs
1
29