Ford 2001 Windstar Owner's Manual page 25

Instrumentation
3. Determine your magnetic zone by
referring to the zone map.
4. From Info menu, select the
1
Compass/Outside Temperature
function. 15
2
14
3
13
4
12
11
5
6
10
8 9
7
5. Press and hold the RESET
control until the message center
display changes to show the current
zone setting.
6. Release the reset control, then
slowly press down again.
7. Press the SETUP control
repeatedly until the correct zone
setting for your geographic location
is displayed on the message center. To exit the zone setting mode press
and release the RESET control.
8. Press the RESET control to start
the compass calibration function.
9. Slowly drive the vehicle in a
circle (less than 5 km/h [3 mph])
until the CIRCLE SLOWLY TO
CALIBRATE indicator changes to
CALIBRATION COMPLETED. This
will take up to three circles to complete calibration.
10. The compass is now calibrated.
25