Introduction; Description - Baxi Platinum 2 Combi 28 GA Installation & Servicing Instructions Manual

i-THINK
Controller
Fig. 1
Data Badge
Fig. 2
© Baxi Heating UK Ltd 2011

1.0 Introduction

1.1

Description

1. The Baxi Platinum 2 Combi GA Range are fully automatic
gas fired wall mounted condensing combination boilers. They
are room sealed and fan assisted, and will serve central heating
and mains fed domestic hot water.
2. The boiler is set to give a maximum output of :-
28 model - 28 kW DHW
25.9 kW CH (Condensing)
33 model - 33 kW DHW
30.3 kW CH (Condensing)
40 model - 40 kW DHW
33.6 kW CH (Condensing)
3. It is designed for use on Natural Gas (G20) ONLY.
4. The boiler is suitable for use only on fully pumped sealed
heating systems. Priority is given to domestic hot water.
5. The boiler data badge gives details of the model, serial
number and Gas Council number and is situated on the inner
door panel. It is visible when the case front panel is removed
(Fig. 2).
6. The boiler is intended to be installed in residential /
commercial / light industrial E.M.C. environments on a
governed meter supply only.
7. The boiler must be installed with one of the purpose
designed flues such as one of the standard horizontal
telescopic flue kits detailed in the Flue Installation Guide .
8. All systems must be thoroughly cleansed, flushed and
treated with inhibitor (see section 6.2).
1.2 Optional Extras
Various low voltage external controls are available as optional
extras. Full details are contained in the relevant sales literature.
1.3 Contents of Pack
The pack contains:-
• Boiler
• Wall Plate inc. Taps
• Template
• Fittings & Literature Pack
NOTE: These Installation & Servicing Instructions MUST be
read in conjunction with the Flue Installation Guide
supplied in the Literature Pack.
7