Clearframe; Mpeg Nr; Dnr; Auto Brightness Sensor - Toshiba 42SL417U Owner's Manual

ClearFrame

The ClearFrame 120 Hz anti-blur technology doubles
the frame rate from 60 frames per second to 120 frames
per second, virtually eliminating motion blur without
adding flicker or reducing image brightness.
1
> Settings > PICTURE > Advanced Picture
Settings >
O K
2
Press B or b to select ClearFrame.
3
Press C or c to select On. Press
Note: If the Picture Mode is set to Game, this feature is not
available.

MPEG NR

The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression.
1
> Settings > PICTURE > Advanced Picture
Settings >
O K
2
Press B or b to select Noise Reduction. Press
3
Press B or b to highlight MPEG NR.
4
Press C or c to select either Low, Middle, High, or
Off. Press
Note: If the Picture Mode is set to Game or PC, this feature
is not available.

DNR

DNR lets you soften the screen representation of a weak
signal to reduce the noise effect.
1
> Settings > PICTURE > Advanced Picture
Settings >
O K
2
Press B or b to select Noise Reduction. Press
3
Press B or b to select DNR.
4
Press C or c to select Low, Middle, High, Auto, or
Off. Press
Note:
• If the Picture Mode is set to Game or PC, this feature is
not available.
• The differences may not always be noticeable. For the
best results, use lower settings, as picture quality may be
greatly reduced if the setting is too high.
50
Downloaded from www.Manualslib.com
Chapter 7: Picture and sound controls
™
.
.
.
.
.
.
manuals search engine

Auto Brightness Sensor

When the Auto Brightness function of Auto Brightness
Sensor Settings is set to On, the TV optimizes the
backlighting levels to suit ambient light conditions.
1
> Settings > PICTURE > Advanced Picture
Settings >
OK
2
Press B or b to select Auto Brightness Sensor
Settings. Press
3
Press B or b to select Auto Brightness Sensor.
4
Press C or c to select On or Off. Press
Note: When the Picture Mode is set to AutoView, this
feature is automatically set to On and will not be available.

Backlight Adjustment Pro

This feature adjusts the backlight so that it can change
to match the ambient light conditions.
1
> Settings > PICTURE > Advanced Picture
. Settings >
OK OK
2
Press B or b to select Auto Brightness Sensor
Settings. Press
3
Press B or b to select Backlight Adjustment Pro.
Press . The Backlight Control Level screen
OK
appears.
4
to display the adjustment window. Press C
Press
OK
or c to select the point. Press B or b to adjust the
level. The adjustment range is from 0 to 100.
Backlight Adjustment Pro
Backlight Control Level
100
Control
Level
.
OK
0
5
Press to fix the adjustment.
OK
To cancel the adjustment when selecting a point,
select Cancel on the screen.
To reset the adjustments of all points to the factory
defaults, select Reset on the screen. Press
Note: If the Auto Brightness Sensor is set to Off, this
feature will not be available.
.
.
O K
.
.
O K
37
Cancel
Reset
Ambient Light
.
.
OK