Diverter Valve Actuator Replacement; Condensate Trap/Siphon Replacement - IDEAL LOGIC Combi 24 Installation And Servicing

58 DIVERTER VaLVE aCTUaTOR REPLaCEMENT

1. Refer to Frame 49.
2. Remove the electrical plug.
3. Using a suitable tool pull out the retaining
clip and lift the diverter head from the brass
body.
4. Fit new actuator head and reassemble in
reverse order.
6. Check operation of the boiler. Refer to
Frames 38 & 39.

59 CONDENsaTE TRaP/sIPhON REPLaCEMENT

1. Refer to Frame 49.
2. Pull off the rubber pipe at the sump drain.
3. Disconnect the condensate drain pipe.
4. Turn the siphon clockwise to disengage and lift to remove.
Note. Keep siphon upright when removing
5. Clean siphon with water.
6. Re-assemble in reverse order.
7. When re-assembling ensure the trap is full of water.
8. Check operation of the boiler. Refer to Frames 38 & 39
44
sERVICING
Diverter Valve Actuator
Retaining Clip
2
Siphon
Ideal Logic Combi -
3
3G9690
Installation and Servicing