Integra DTR-6.4 Service Manual page 10

Index parts and facilities
QQ
3 7 63 1515 0
The RC-534M/517M is a multi-functional remote controller. The
instructions given here only explain how to use the remote
controller in conjunction with the DTR-6.4/5.4. To operate the
DTR-6.4/5.4 using the remote controller, first press the RCVR
Mode button to place the remote controller in the receiver mode.
Send/Learn indicator
Lights red when signals are sent by the remote controller. It also
flashes when a button is pressed when the battery power is low.
On/Standby button
On: Press to turn on the DTR-6.4/5.4.
Standby: Press to place the DTR-6.4/5.4 in the standby state.
Be aware that pressing the Standby button only places the DTR-6.4/
5.4 in standby and does not turn the power completely off.
Sleep button
Press to set the sleep function.
The Sleep button enables you to set the DTR-6.4/5.4 to turn off
automatically after a specified time period.
Macro 1, 2 button
Press to program or execute the macro function.
Mode buttons and indicators
Press to select the component to be operated by the remote
controller. When a Mode button is pressed, it will light for 8
TE
seconds. The selected Mode button will also light whenever any L 13942296513
other operation button is pressed.
Return button
Press to enter the selected setting and return to the previous menu.
CH , Disc
Press to select a preset channel for the tuner (CH).
CH Sel button
Press to select a speaker channel when adjusting the speaker level
(CH Sel).
Audio Sel
Press to select the audio input signal.
Level / buttons
Press to adjust the volume of the speaker selected using the CH Sel
button.
Operation buttons
Press to operate other devices connected to the DTR-6.4/5.4.
www
Input Selector buttons
Press to select an input source.
Same as the input selector buttons on the front panel of the DTR-
6.4/5.4. The input source for each button is given here. DVD:DVD,
.
CD:CD, V1:VIDEO1, V2:VIDEO2, V3:VIDEO3, V4:VIDEO4,
V5:VIDEO5 (not used with the DTR-6.4/5.4), TAP:TAPE,
TUN:FM/AM, PH:PHONO (not used with the DTR-5.4).
http://www.xiaoyu163.com
button
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Listening mode buttons
You can select a listening mode.
Display button
For changing the display in the front display.
Dimmer button
Adjusts the display brightness.
There are three settings available: normal, dark, and very dark.
Light button (RC-534M only)
Press to turn on and off the lights in the buttons of the remote
controller.
Setup button
Press to display the Setup Menu on the TV screen and in the
display. Press again to exit the menu.
/ / / , ENTER button
When in the Setup Menu, press the upper and lower arrow buttons
to select an item, press the right and left arrow buttons to select
parameter values or modes, and press the ENTER button to advance
to the next item.
VOL button
Q Q
Press to adjust the volume.
3 6 7 1 3 1 5
Test button
This button is used to set the speaker output levels. Use this button
in conjunction with the Level
the speakers levels without entering the Setup Menu.
Muting button
Press to activate the mute function.
Audio Adjust button
Press to adjust the sound quality and the listening mode.
Re-EQ button (DTR-6.4)
Depending on the listening mode, you can turn the Re-EQ function
on or off.
CINE FLTR button (DTR-5.4)
Depending on the listening mode, you can turn the CinemaFILTER
function on or off.
Zone 2 button
Press to perform operations on the remote zone (Zone 2).
co
.
9 4 2 8
0 5 8 2 9 9 4 2 8
/ and CH Sel buttons to calibrate
m
DTR-6.4
9 9
9 9