Access Aging Mode; Access Factory Mode; Aging And Factory Model - Philips 32TA1000/93 Service Manual

5. Aging and Factory Mode
index of this chapter:

5.1 Access Aging Mode

5.2 Access Factory Mode

Top Control
- +
Volume Menu
Left
Right
<B> <C> <D>
Front Control
Power SW LED RC sensor
<A>
5.1 Access Aging Mode
Step 1 : D isconnect Interface Cable between Monitor and PC.
Step 2 : Turn off LCD monitor.Then
quickly push " + "and " - " of Volume ,and hold this two buttons
comes out " AGING screen"] => then release all buttons.
Bring up:
After 52 seconds,
bring up:
After 60 seconds,
bring up:
After 52 seconds,
bring up:
----------
----------
repeatly
Connect Signal cable again=> go back to normal display
5. Aging and Factory Mode
- +
Channel
Down Up
<E> <F>
press power " " button.Then
untill
AGING...
AGING...
AGING...
5.2 Access Factory Mode
1). Turn off monitor.
2). Press power " " button.Then quickly push " + " and " - "of
Volume ,and hold this two buttons , then the screen comes out
"Waiting For Automatic Adjustment ",then the screen will be black
for one second untill comes out "Windows screen"] => then
release this two buttons.
3). Press "MENU" button, wait until the OSD menu with
Characters "CHINA MAGNAVOX32 V0.2.0 051012
CLAA320WA01" (below OSD menu) come on the Screen
of the monitor.
Factory Mode indicator
Factory Menu
Cursor can move on gray color area
Hot key function: at factory mode , press "MENU" button,then press
" + " and " - " of Channel to the factory mode indicator ,then press
" + " of Volume .Press the " + " and " - " of Channel to "exit " and
press "MENU" to exit factory adjust menu.
(PS: The Offset R G B function can be used on reduce or eliminate
snowy noise on the background when the resolution of video signal
is 1280*768 vertical 75Hz. Slightly increase or decrease the value
until snowy noise completely disappear.
TPF1.4A LA 9