MSI H170M PRO-VDH User Manual page 38

fPEG X - Max Link Speed [Auto]
Sets PCI Express protocol of PCIe x16 slots for matching different installed devices.
[Auto]
[Gen1]
[Gen2]
[Gen3]
fPCI Latency Timer [32]
Sets latency timer of PCI interface device.
[Options: 32, 64, 96, 128, 160, 192, 224, 248 PCI Bus clocks]
ACPI Settings
f
Sets ACPI parameters of onboard power LED behaviors. Press <Enter> to enter the
sub-menu.
fPower LED [Blinking]
Sets shining behaviors of the onboard Power LED.
[Dual Color]
[Blinking]
Integrated Peripherals
f
Sets integrated peripherals' parameters, such as LAN, HDD, USB and audio. Press
<Enter> to enter the sub-menu.
fOnboard LAN Controller [Enabled]
Enables or disables the onboard LAN controller.
fLAN Option ROM [Disabled]
Enables or disables the legacy network Boot Option ROM for detailed settings. This
item will appear when Onboard LAN Controller is enabled.
[Enabled]
[Disabled]
fNetwork Stack [Disabled]
Sets UEFI network stack for optimizing IPv4 / IPv6 function.
[Enabled]
[Disabled]
fSATA Mode [AHCI Mode]
Sets the operation mode of the onboard SATA controller.
[AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI (Advanced
[RAID Mode] Enables RAID function for SATA storage devices.
38
BIOS Setup
This item will be configured automatically by BIOS.
Enables PCIe Gen1 support only.
Enables PCIe Gen2 support only.
Enables PCIe Gen3 support only.
The power LED turns to another color to indicate the S3 state.
The power LED blinks to indicate the S3 state.
Enables the onboard LAN Boot ROM.
Disables the onboard LAN Boot ROM.
Enables UEFI network stack.
Disables UEFI network stack.
Host Controller Interface) offers some advanced features to enhance
the speed and performance of SATA storage device, such as Native
Command Queuing (NCQ) and hot-plugging.