Rear Panel Description; Power; Phantom; Ac Inlet With Fuse Holder - Alto S-8 User Manual

4.12 REAR PANEL DESCRIPTION

25

POWER

ON
OFF
fuse fuse fuse 250V 250V 250V
- POWER
This switch is used to turn the Main Power ON and OFF.

- PHANTOM

This switch will apply +48 Volt Phantom Power only to the 5 XLR microphone inputs. Never connect microphones
when the Phantom Power is on already.

- AC INLET WITH FUSE HOLDER

Use it to connect your S-8 to the Main AC with the supplied AC cord. Please check the Voltage available in your
Country and make sure the voltage is identical to the values marking on the product. Replace the fuse with the
same type by the qualified personnel only

- MAIN MIX OUTPUT

This stereo output is supplied both with XLR and 1/4" jack socket and it is controlled by the Main Mix Level on
the front panel. It will send the audio signal to an amplifier. The output level can be varied from -

- CONTROL ROOM OUTPUT

These 1/4" phone sockets will be used to send the signal to Studio Monitor speakers or to a second set of PA.
4
PHANTOM
a a a with with with only only only Use Use Use
AC INPUT
EUROPE
210-240V 50Hz
Fuse:T250mAL
RATED POWER CONSUMPTION: 18W
USA / Canada
100-120V 60Hz 240V
26
Fuse:T250mAL
Fuse:T500mAL
25
4
27
28
CAUTION:
REPLACE WITH THE SAME TYPE FUSE AND RATING
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE
MAIN MIX OUTPUT
(BAL/UNBAL)
RIGHT
2 1 2
3
UK / Aust
50Hz
27
26
13
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: SHOCK HAZARD
- DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE
CONTROL
ROOM OUTPUT
LEFT
1 LEFT
3
RIGHT
- NE PAS OUVRIR
LEFT
RIGHT
28
to +15dB.