Technical Specification - Alto AMX-120 User Manual

8. TECHNICAL SPECIFICATION

Mono input channels
Stereo input channels
Impedances
Equalization
Main Mix Section
Power supply (AC/AC Adaptor)
Physical
Microphone input
Frequency response
Distortion (THD & N)
Gain range
SNR (Signal to Noise Ratio)
Line input
Frequency response
Distortion (THD & N)
Sensitivity range
Line input
Frequency response
Distortion (THD & N)
Microphone input
All other inputs
Tape out
All other output
Hi shelving
Mid bell
Low shelving
Low Cut filter
Noise (Bus noise)
Max output
AUX Sends max out
Main voltage
Power Consumption
Dimension (W D H)
Net weight
Shipping weight
electronically balanced, discrete input configuration
10Hz to 55kHz, +
0.005% at 4dBu, 1kHz +
0dB to 44dB (MIC)
115dB
electronically balanced
10Hz to 55kHz, +
0.005% at 4dBu, 1kHz +
+15dBu to 30dBu
Balanced
10Hz to 55kHz,
+
0.005% at +4dBu, 1kHz
1.4kOhm
10kOhm or greater
1kOhm
120Ohm
+ 15dB @12kHz
+ 12dB @2.5kHz
+ 15dB @80Hz
75Hz, 18dB/oct.
Fader 0 dB, channels muted: 100dBr (ref.:+4dBu)
Fader 0dB, all input channels assigned and set to
UNITY gain: 90dBr (ref.:+4dBu)
+ 22dBu unbalanced, 1/4" jacks
+22dBu
USA/Canada 100 120V~, 60Hz
Europe 210 240V~, 50Hz
U.K./Australia 240V~, 50Hz
11 watts
208mm 275.5mm 35/43mm
(6.06" 7.81" 1.01"/1.30")
1.65Kg (3.65lb)
2.3Kg (5.11lb)
17
3dB
3dB
3dB