Cassette Toilet (Option) - Jayco Eagle Owner's Manual

Cassette Toilet (Option)

PREPARING FOR USE
1. Open access door on the right side of the camper and swing
out fresh water fill funnel.
2. Fill the water tank with clean fresh water using a hose or
jerrycan until water funnel level reaches neck. Tank capac-
ity is 3.9 gallons.
3. Replace cap. Swing water fill funnel inward until it touches
side of water tank. NOTE: 150 ml of water will remain
in fill bottle when fresh water tank is empty.
4. Remove the cassette by pressing the retaining clip down.
5. Remove cassette by pulling straight out. When cassette hits
stop, tilt downward slightly and remove (stop for safety
when cassette is full).
6. Position tank vertical and swivel pour-out spout upward.
7. Remove cap. Remove Aqua Kem® from storage compart-
ment. Add given amount of Aqua Kem® through pour-out
spout. Add water until the bottom of the cassette is com-
pletely covered with liquid.
Replace cap and return pour-out spout to its original stored
position. NOTE: The cap of the pour-out spout is packed
together with the instructions for use. Hotter weather or
longer retention time may require addition of more Aqua
Kem®.
CAUTION: Never add Aqua Kem® through the valve
blade or the toilet bowl. Pressure (due to heat and altitude
change) can build up in the cassette tank and cause the
contents of the bowl to splash upward upon opening the
valve blade, if opened too fast.
8. Slide the cassette, pour-out spout facing outside, into the
camper through the access door. Be aware that sliding cover
is placed correctly; the two arrows on top have to be
pointed towards each other.
9. Make sure the cassette is locked with the cassette retaining
clip.
32