Product Specifications - Ryobi RBV26GN Operator's Manual

Operator’s manual

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

Read this safety and operating

instructions in this booklet and keep it in a

safe place for future reference.

Beware of thrown or flying objects. Keep

all bystanders at least 15 m away.

Wear eye protection

Wear ear protection

Do not run product without tubes in place.

Risk of long hair being drawn into air inlet.

Risk of loose clothing being drawn into air

intake.

To reduce the risk of injury or damage,

avoid contact with any hot surface.

Warning! Hot surface.

Dangerous feed orifice. Rotating fans.

Keep hands and feet out of the openings

while the product is running.

Guaranteed sound pressure and sound

power level.

109

Use unleaded petrol intended for motor

vehicle use with an octane rating of 91

([R+M]/2) or higher.

Use 2-stroke oil for air cooled engines.

Mix the fuel mix thoroughly and also each

time before refueling.

Regulatory Compliance Mark (RCM).

This product meets applicable regulatory

requirements.

The following signal words and meanings are intended

to explain the levels of risk associated with this product.

DANGER:

Indicates an imminently hazardous situation, which, if not

avoided, will result in death or serious injury.

WARNING:

Indicates a potentially hazardous situation, which, if not

avoided, could result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation, which, if not

avoided, may result in minor or moderate injury.

CAUTION:

(Without Safety Alert Symbol) Indicates a situation that

may result in property damage.

DESCRIPTION

(REFER TO FIGURE SHEET)

Lower vacuum tube

Vacuum bag

Adaptor

Cruise control

Throttle trigger

Upper vacuum tube

Vacuum tube screw

Fuel cap

Starter grip

10. Choke lever

11. Upper handle

12. On/Off switch

13.

14. Primer bulb

15. Vacuum handle

16. Combination wrench

17. Sweeper nozzle

18. Upper blower tube

19. Door release tab

20. Impeller cover door

21. High velocity nozzle with leaf scraper

22.

23. Adaptor installed in vacuum bag

24. Raised locking tab

25. Locking tab

26. Vacuum bag assembly

27. Inlet cover tab

28. Vacuum opening

29. Locking tab on vacuum opening

30. Vacuum tube assembly

31. Screw for holding vacuum tube assembly

32. Quick start label

33.

34.

35.

36. Spark plug boot

37. Spark plug