Ryobi RBV26GN Operator's Manual page 5

Vibration value at handle according to EN
15503:2009+A1:2013 Annex B:
Blower mode (Upper handle)
Racing (without nozzle):
Idling:
Equivalent vibration total value:
Vacuum mode (Upper handle/Vacuum handle)
Racing
Idling
Equivalent vibration total value
Uncertainty K (Vibration)
Sound power level according to EN 15503:2009+A1:2013
Annex A (Blower / vacuum) :
Racing
Idling
Equivalent A-weight Sound power
level:
Uncertainty K
(sound power level)
Sound pressure level at operator position according
to EN 15503:2009 Annex A (Blower/Vacuum)
Racing
Idling
Equivalent A-weight emission sound
pressure level
Uncertainty K
(sound pressure level)
FEATURES
KNOW YOUR BLOWER/VACUUM
See Figures 1a - 1b.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BLOWER TUBE AND NOZZLES
The blower tube can be assembled and installed on the
blower without using any tools.
CRUISE CONTROL
The cruise control feature allows the user to operate the
blower without holding the throttle trigger. To slow the engine,
simply push the cruise control lever forward.
HIGH VELOCITY NOZZLE WITH WET LEAF
SCRAPER
The high velocity nozzle is great for wet sticky leaves. It allows
you to scrape wet leaves or debris while operating the blower.
ENGINE
to handle tough blowing and vacuuming jobs.
SIMPLE START™
The Simple Start allows for easier and quicker starting.
SWEEPER NOZZLE
18.9 m/s
2
The sweeper nozzle allows for more area to be covered dur-
7.0 m/s
2
ing blower operation.
17.7 m/s
2
THROTTLE TRIGGER
12.6 / 19.8 m/s 2
The blower can be operated at any speed between idle and
6.5 / 6.3 m/s
2
full throttle.
11.9 / 18.5 m/s
2
VACUUM
1.5 m/s
2
Converting the blower to a vacuum is simple and can be done
105.7 / 106.0 dB(A)
VACUUM BAG
89.7 / 87.9 dB(A) The vacuum bag attaches to the blower easily by using the
vacuum bag adaptor.
105.7 / 106.0 dB(A)
VACUUM HANDLE
3.0 dB
This feature allows user to perform vacuuming duties
comfortably.
VACUUM TUBES
91.7 / 95.2 dB(A) The vacuum tubes can be installed on the blower using a
75.8 / 74.5 dB(A)
91.1 / 94.5 dB(A) ASSEMBLY
3 dB
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from
the box. Make sure that all items listed on the Packing
List are included.
Do not use this product if any parts on the Packing List are
already assembled to your product when you unpack it.
Parts on this list are not assembled to the product by the
manufacturer and require customer installation. Use of a
product that may have been improperly assembled could
result in serious personal injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call Ryobi
customer service for assistance.
PACKING LIST
Blower
Upper blower tube
Sweeper nozzle
High velocity nozzle
Upper and lower vacuum tubes
Vacuum tube screws (2)
Vacuum bag
5
WARNING: