Product Specifications; Battery And Charger - Ryobi R18XBLW20 Manual

PRODUCT SPECIFICATIONS

Cordless blower
Model
Rated voltage
Speed
Air velocity
Air volume
Weight
Without battery pack
With heaviest battery pack
Vibration level (in accordance with Annex BB of EN 50636-2-
100:2014)
Total value a
h
Uncertainty of measurement K
Noise emission level (in accordance with Annex CC of EN 50636-
2-100:2014)
A-weighted sound pressure level
at operator's position L
pA
Uncertainty of measurement K
pA
A-weighted sound power level
L
wA
Uncertainty of measurement K
wA
L + K
wA wA

BATTERY AND CHARGER

Model R18XBLW20
Battery pack -
Charger -
RB18L13, RB18L13Z, RB18L15, RB18L15A,
RB18L15B, RB1815C, RB18L20, RB18L20A,
RB1820C, RB18L25, RB18L25A, RB18L30,
Compatible
RB18L30A, RB18L40, RB18L40A, RB1840C,
battery pack
RB1840X, RB18L50, RB18L50A, RB1850C,
RB1850X, RB18L60, RB18L60A, RB18L90,
Compatible RC18150U, BCL14183H, RC18120, RC18627U,
charger BCS618G, RC18115, RC18118C, BCL14181V
R18XBLW20
18 V d.c.
17700 /min
177 km/h
9.9 m /min
3
2.5 kg
3.7 kg
4.1 m/s²
1.5 m/s²
80.7 dB(A)
3.0 dB
96.7 dB(A)
4.2 dB
101 dB(A)
R18XBLW24
RB1840C
RC18115
RB18L90A
WARNING! The declared vibration total
values and the declared noise emission values
given in this instruction manual have been
measured in accordance with a standardised
test and may be used to compare one tool with
another. They may be used for a preliminary
assessment of exposure.
The declared vibration and noise emission
values represent the main applications of the
tool. However, if the tool is used for different
applications, used with different accessories,
or poorly maintained, the vibration and noise
emission may differ. These conditions may
significantly increase the exposure levels over
the total working period.
An estimation of the level of exposure to
vibration and noise should take into account
the times when the tool is turned off or when
it is running idle. These conditions may
significantly reduce the exposure level over
the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration and
noise, such as maintaining the tool and the
accessories, keeping the hands warm (in case
of vibration), and organising work patterns.