Table of Contents
Advertisement
ASSEMBLING THE MOWER BEFORE FIRST USE
When transporting your mower, ensure that the fuel shut-
off valve is in the 'OFF' position.
(Refer g.1 - Code 493) or (Refer g.2 - Code 563)
Delivery Checklist
Remove the mower from the packaging and check that
the following items have been supplied correctly. If any
items are missing, contact your local Hayter dealer.
1. Engine Handbook.
2. Grassbag.
3. Parts List/D of C.
4. Warranty Reg Card.
To prevent accidents cut off the long ribbon attached to
the grassbag and discard. (Refer g.3)
Handlebar
Unscrew the handlebar securing knobs suf ciently to
allow the handlebar to pivot.
Move the blade stop lever away from the engine to avoid
damage and unfold the handlebar to the operating posi-
tion. (Refer g.4)
Tighten both handlebar knobs to secure in position.
Take care to ensure that the control cables do not
become snagged at the pivot point.
Fig. 1
Fig. 2
Grassbag Assembly
Before rst use assemble the grassbag and frame.
Slide the frame (1) into the grassbag (2), ensuring that
the handle is above the grassbag as shown.
Attach plastic clips (A), (B), (C) and (D) to the grassbag
frame. (Refer g.5)
Raise the rear de ector, lower the grassbag and hook in
position. Lower the de ector to rest on the grassbag.
Fig. 3
Fig. 4
7
Fig. 5
2
1
B
A
D
C
Advertisement
Table of Contents
