Tape; Loading A Tape; Playing A Tape - Sony LBT-GV10AV Operating Instructions Manual

Tape

Loading a tape

1
Press A EJECT Z or Z B EJECT.
2
Insert a tape in deck A or B with the
side you want to play facing forward.
Insert with the
side you want to
play/record facing
forward.

Playing a tape

You can play any type of tape. TYPE I
(normal), TYPE II (CrO
The deck automatically detects the tape type.
1
Load a recorded tape.
2
Press DIRECTION repeatedly to select
g to play one side. Select j to play
both sides. Select RELAY (Relay Play)*
to play both decks in succession.
3
Press H (or DECK A nN, DECK B
nN on the remote).
Press h (or DECK A nN, DECK B
nN on the remote) to play the reverse
side. The tape starts playing.
* Relay Play always follows this cyclical sequence:
Deck A (front side) t Deck A (reverse side) t
Deck B (front side) t Deck B (reverse side)
To Do this
Press x.
Stop play
Press X.
Pause
(deck B only) Press again to resume play.
Press M or m in stop mode.
Fast-forward
Press m or M in stop mode.
Rewind
Press A EJECT Z (or Z B
Remove the
cassette EJECT).
), or TYPE IV (metal).
2
Tips
• The deck stops automatically after repeating the
sequence five times.
• You can fast-forward or rewind the tape, regardless
of the selected source.
• When you want to reduce the hiss noise in low-level
high-frequency signals, press DOLBY NR so that
"DOLBY NR B" appears.
Searching for the beginning of a
track (AMS)
During playback, press . or > repeatedly
for the number of songs you want to skip
forward (or backward).
The search direction, + (forward) or – (back),
and number of songs being skipped (1~9)
appear.
Example: searching forward 2 songs
Note
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the unit is placed near a television.
25