Other Operations - Sony LBT-GV10AV Operating Instructions Manual

Other Operations

Do this
To
Press x.
Stop playback
Press HX (or X on the
Pause
remote)*
resume play (or SELECT
CD N on the remote).
Press NEXT to go forward,
Select a track
PREV to go back.
Or, during play or pause,
turn the jog dial clockwise
(to go forward) or
counterclockwise (to go
backward) and release it
when you reach the desired
track. (Or press > (to go
forward) or . (to go
backward) on the remote.)*
Press M or m during
Find a point
playback.
in a track or scene
1 Press once to start
(Lock Search function)
searching.
2 Press again to increase
the search speed. Each time
you press the button, the
speed changes as follows:
1(slow) t 2 (normal) t
3 (high) t 1(slow)...
3 Press HX at the desired
point to stop searching.
Press one of the DISC 1 ~ 5
Select a VIDEO
or DISC SKIP buttons (or
CD in stop
D.SKIP on the remote).
mode
Press any of the buttons,
Switch to VIDEO CD
DISC 1~ 5 or HX (or
function from another
SELECT CD N on the
source
remote) (Automatic Source
Selection).
Play repeatedly
Press REPEAT during
(Repeat Play)
playback until "REPEAT" or
"REPEAT1" appears.
REPEAT: For all the tracks
on the VIDEO CD.
REPEAT1*
track only.
To cancel playing
repeatedly, press REPEAT
until "REPEAT" or
"REPEAT1" disappears.
Remove the VIDEO
Press PUSH OPEN.
CD
1
. Press again to
2
2
: For a single
1
* There may be some disturbance in the paused video
image.
2
* Only for VIDEO CDs without PBC functions (Ver.
1.1).
Tips
• You can start playing from the desired track (or
scene for VCD) by pressing the numeric buttons
on the remote in stop mode.
To enter track number 10 or over, first press >10,
then press numeric buttons.
To enter 0, press 10/0.
e.g.) To enter track number 30, press >10, then 3
and 10/0.
• You can change the VIDEO CD in the loading
position during playback of the VIDEO CD in the
playing position.
13