Table of Contents
Advertisement
Item
AUTOMATIC SIGNAL
Preparation
(1) Input the adjustment signal of 576p or
480p format into AV1 input terminal.
the adjustment signal
The signal level of black area
should be pedestal level.
This signal must not be inserted
characters etc.
Black White
0.7V
[Note] Never adjust without use of the specified signal.
If that were done by mistake, the picture would become abnormal in black level, contrast and color.
In this case, it will be recovered by re-adjustment in the specified way.
EL ADJ USTMENT –VIDEO
LEV
Procedure
(1) Select AV1 and enter the service adjustment mode.
(2) Select No.743 "Automatic White peak Adj. (Multi)"
and press OK button for more than 2 seconds to
start the adjustment.
It will complete the adjustment after the OSD of
"AUTO MODE" disappeared.
49
PW1A
Advertisement
Table of Contents
