Test Equipment - Motorola RADIUS CM200 Basic Service Manual

2-20
10.0

Test Equipment

Table 2-6 lists test equipment required to service the radio and other two-way radios
.
Motorola Part No.
R2000, R2600 Service Monitor
R2400, or R2001
with trunking
option for Pri-
vacy Plus™ and
Smartnet Sys-
†
tems™
*R1049 Digital Multimeter
*S1100 Audio Oscillator
*S1053, AC Voltmeter,
*SKN6009, Power Cable
*SKN6001 for meter,
Test leads for meter
R1053 Dual-trace Oscillo-
scope
R1443A Broadband Watt-
meter
S1339 RF Millivolt Meter
*R1013 SINAD Meter
S1348 (prog) DC Power Supply
Table 2-6 Recommended Test Equipment
Description
This monitor will
substitute for items
listed below with an
asterisk *
67 to 200Hz tones
• 1 mV to 300 V
• 10 MΩ input imped-
ance
20 MHz bandwidth,
5 mV/cm - 20 V/cm
100 µV to 3 VRF, 10
kHz to 1.2 GHz
0-20 Vdc, 0-20 Amps
Characteristics Application
Frequency/deviation meter and sig-
nal generator for wide-range trouble-
shooting and alignment
Two meters recommended for AC/
DC voltage and current measure-
ments
Used with service monitor for injec-
tion of PL tones
Audio voltage measurements
Waveform measurements
Transmitter power output measure-
ments
RF level measurements
Receiver sensitivity measurements
Bench supply for 13.8Vdc
MAINTENANCE