Troubleshooting; Restoring The Factory Programmed Settings - Yamaha RIVAGE PM10 Owner's Manual

Troubleshooting

Please visit the Yamaha Pro Audio website for an FAQ list
(Frequently Asked Questions).
http://www.yamahaproaudio.com/
Power does not turn on.
❍ Make sure that the power switches are turned ON.
❍ Make sure that the AC power cords are connected.
➥ If the power still does not turn on, contact your Yamaha
dealer.
The unit is not receiving an audio input signal.
❍ If you are using an optional card, make sure that it is
installed properly.
❍ Make sure that the cables are connected properly.
16 DSP-R10 Owner's Manual
Restoring the Factory
Programmed Settings
Follow the steps below to initialize the internal memory of
the unit to the factory programmed settings.
1.
While the unit's power is on, press the
[MENU] key on the front panel.
2.
Use the [U]/[D] keys to select "Initialz."
3.
Press the [ENTER] key.
Press&Hold
[ENTER] to
initialize
4.
Press and hold the [ENTER] key for two
seconds or longer.
The internal memory is initialized and the unit
automatically restarts. After the unit restarts, the
initialization process is complete.
To cancel the initialization process, press the
[MENU], [U] or [D] key, instead of pressing the
[ENTER] key.