Nikon FM2 Instruction Manual page 9

9
Install the film cartridge.
• Position the film cartridge in the
film cartridge chamber
@
with the film
leader pointing towards the takeup spool
@,
and push the rewind knob back down
to secure it in place.
Note:
You can use any of the 3Smm film car-
tridges available on the market. It is advisable
to handle film in the shade to avoid direct ex-
posure to sunlight.
10
Insert the film leader
• In the takeup spool.
Pull the leader across gently and insert it
into one of the slots in- the film takeup
spool. Slowly rotate the takeup spool
inwards with your thumb, making sure the
latch in the slot engages the first or sec-
ond perforation along the side of the film
leader.
11
Wind the film advance
• lever to advance film
onto the takeup spool.
Wind the film advance lever and depress
the shutter release button until the film
sprockets ® engage the perforations on
the edges of the film . Make sure you wind
the lever fully until it comes to a stop.
9