Ready-Light - Nikon FM2 Instruction Manual

-CONTROLS IN DETAIL-continued--- - - - - - -
Picture taken by balancing the flash exposure with daylight.
34
I I I
11 1111111 III
' I I
l
Ready-light
®
When the 8B-28, 8B-27, 8B-26, 8B-25, 8B-24, 8B-22, 8B-20,
8B-19 or 8B-16B is attached to the FM2 , the built-in LED
ready-light tells you when the speed light is recycled and ready
to fire or when the shutter speed is set outside sync range ,
without your having to remove your eye from the viewfinder.
Before you shoot, make sure the ready-light is on. The moment
the shutter is released , the speedlight will fire and the ready-
light will go out.
If the shutter speed is set between 1/500 sec. and 1/4000 sec.,
the ready-light will blink when the speedlight is fully charged , to
warn you that the shutter speed is outside sync range .
For ready-light availability with speedlights other than the
8B-28, 8B-27, 8B-26, 8B-25, 8B-24, 8B-22, 8B-20, 8B-19 and
8B-16B, refer to page 35.